|Non woven/PP woven/PP non woven/Nylon/Polyester/PVC/PU+PEVA film/PE foam/Aluminum foil
|Offset printing/Heat Transfer Printing/Screen printing/CMYK/Full color printing
|Sliver/Golden Hot Stamping,Embossing,Debossing
|Hand/Shoulder Length Handle(W*L),Drawstring,Patch,Zipper Top,Button Closure/ velcro
|Non woven/ PP non woven/Laminated pp wove/Nylon webbing
|Piping around the bag,X-stitching on handle
|200pcs packed in standard export carton(each pcs packed inpoly/opp bag),or as required.
|Whole mass production will be AZO free,cadmium low (below 100 ppm),lead below(below 40 ppm).
Structure: Aluminum Foil+PE+Woven fabric+PE+Aluminum Foil
Max Width per roll: 1.83 m, length can meet the customer’s demand
1. Light weight, clean, thin, good flexibility and cushioning;
2. Invariable if it is attacked repeatedly;
3. Low thermal conductivity and superior heat insulation;
4. Outstanding safety and enviromentally friendly;
5. Easy to install, high efficiency;
6. Cost effective and versatile.
It is economical solution for a wide range of industrial, manufacturing, packaging and consumer application. Such as for industrial sheds, commercial buildings, home insulation, under wood or laminated flooring, roof insulation, carpet underlay, for horticultural purposes, in greenhouses and construction, packaging material to the sensitive products. To protect precise machine, elevator, slap up furniture etc.
Metallised PET films are used in NASA’s spacesuits to make them radiation resistant and keep astronauts warm, and in proximity (aluminised) suits are used by AR-FF fire fighters for protection from the high amount of heat released from fuel fires. Silvered emergency blankets are also used to conserve a shock victim’s body heat. These reflective materials might also be used as part of industrial and commercial insulation (for example, insulated shipping containers).
Insulating blankets made with metallised PET were also used as insulation in aircraft until safety concerns resulted in their deprecation.In particular, it was found to be a major contributor to the in-flight fire of Swissair Flight 111 on September 2, 1998.
Metallised films are used as a dielectric in the manufacture of a type of capacitor used in electronic circuits, and as a material in some types of antistatic bags.
The inflammable nature of Metallised PET led to the deaths of 229 people aboard Swissair Flight 111 off Nova Scotia Canada.
Air moves in and out of a home through every hole, crack, and crevice. Roughly 33% of air infiltrates through walls, ceiling, and floors. Adding an advanced insulation system is necessary to achieve optimal building performance. Lapolla is that advanced insulation system.
Spray foam insulation can maximize a homeowner’s investment by sealing the building envelope to stop conditioned indoor air from escaping and prevent unconditioned air from entering a home. Air exchange in and out of a home is a leading cause of escalated energy bills. The mechanical systems that heat and cool buildings are continuously operating; reducing extreme temperature variations saves on the overuse of mechanical systems and leads to lower energy bills.
Shipping temperature-sensitive products presents special challenges for ship, rail, and air cargo. With insulated packaging supplies you can be confident that your items will deliver safely. insulated pallet covers and thermal container liners provide you with cost-savings and peace of mind. foil bubble products are ideal for shipping food, chocolate, medicine, candles or virtually any perishable item.
Insulating foil stops 95 percent of radiant heat that can threaten product quality or package contents
Compact, lightweight and strong pallet covers & liners
Performs as well as or better than EPS foam and other types of insulation typically used to ship temperature-sensitive items
Delivers savings due to reduced shipping costs, materials and warehouse storage space
Pallet covers & liners are space-efficient, less bulky and environmentally friendly
Clean, streamlined design makes your shipped products stand out from the crowd
thermal shipping packaging offers great solutions for pharmaceutical cold chain shipping.
Oxidisation and corrosion resisitant
·Perfect water and vapor barrier
·99% pure aluminum (with reinforced weave/scrim)
·Up to 97% reflectivity
·Antiglare side 95% reflectivity
·Excellent fire resistance
·Good acoustic insulation
·Very tough and durable
·Fibre-free and non-itch
Laminating film is pre-adhesive plastic film and paper printing and then rewinding complex process. It is used first by laminating factory specifications according to the different format will glue coating after rewinding the film for use on the factory options, and then combined with the printed matter. Coating, that film is plastic film coated with adhesive, printed with the paper by heat and pressure so that after sticking together to form one paper and plastic products, processing technology. The coating of the print, due to surface more than a thin transparent plastic film surface is smooth and shining, to improve print gloss and fastness, graphic colors more vivid, rich three-dimensional, but also play a waterproof, stain, abrasion, folding, chemical resistance and so on.
(1) film thickness between 0.01-0.02mm, corona, or other methods of treatment, the surface tension should reach 4.0 x 10-2N / m, in order to have good wetting properties and bonding performance. Laminating film from the substrate and the adhesive layer composition, the substrate is usually polyester (PET) film and biaxially oriented polypropylene (BOPP) film. BOPP film with high transparency, good brightness, non-toxic and tasteless, water-resistant, heat-resistant, inexpensive, soft, etc., is the preferred coating process in the material, its thickness is about 12-20um, therefore, material costs and processing point of view, most of the laminating film BOPP film substrate used.
Laminating adhesive layer melt-and solvent evaporation are two kinds of processing equipment and process conditions according to the different choice of different thickness of adhesive layer, adhesive layer thickness between the 5-15um. Currently, the domestic laminating adhesive layer consists of low temperature hot melt adhesive or organic polymer resin composition. Hot melt adhesive is a sticky resin from the main and thickening agent, conditioning agent made of several materials, blending modification. Organic polymer resin is a low-temperature single-polymer copolymer. As the hot melt adhesive is a mixture of several materials, so transparent after the coating was significantly lower than the laminating temperature of pure resin.
Solvent evaporation process and the laminating film production film coating process is similar to colloidal organic solvent and then coated in a thin film substrate, it may not completely evaporate the organic solvent, coating operation, odor of operator injury (as opposed to the film coating process, the damage is much smaller) and so, after solvent evaporation coating, it tends to form bubbles in the print surface.
structure:3 in 1,4 in 1 or 5 in 1
1.alu foil/PE/woven fabric
2.alu foil/PE/woven fabric/PE
3.alu foil/PE/woven fabric/PE/alu foil
Width : 1-1.83m
Length:according customer’s demand
It is economical solution for a wide range of industrial,manufacturing ,packaging and consumer application.Such as for industrial sheds,commercial buildings,home insulation ,under wood or laminated flooring,roof insulation, carpet underlay and construction,packaging material to the sensitive products